Bei der letzten Aufräumaktion im Rechenzentrum fielen mir ein paar Clavister Security Gateway S340 in die Hände. Darin stromsparende MicroATX Mainboards (EM-563). Also schicke kleine Dinger mit ordentlich was drin.
Dieses Deep-tec Log zeigt was sonst noch unter der Haube ist.
Bilder der Clavister Security Gateway (Firewall) S340:
Hier ein Blick auf das schon fertig gepimpte Gehäuse
Rechts unten: 4x Lan,
Lenks unten: Serielles LCD
Rechts Oben: CF-Karte
Hier ein Blick aufs Board: Alles was man braucht ist da – zumindest als Stiftleiste
Bios-Screens:
Das BIOS gibt eine Menge einstellungen her…
…die wichtigste dürfte sein das Das System nicht auf F1 wartet wenn mal was ist.
Spezifikationen:
In den Tiefen des Webs gefunden: Offizielle Spezifikationen
Und noch viel wichtiger: Das Layout/Pinout der Connectoren.
Weitere Bilder:
Einige Kondensatoren wölben sich schon – und müssen getauscht werden. 3000uF 16V. Keine große Sache.
Die CF-Karte mit dem OS tausche ich niocht oft. Eine alte USB Blende ist hier viel sinnvoller.
dmesg:
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fdfffff]
[ 0.000000] [mem 0x0fc00000-0x0fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0fbfffff]
[ 0.000000] [mem 0x0c000000-0x0fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x0bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x0fe00000-0x0fefffff]
[ 0.000000] [mem 0x0fe00000-0x0fefffff] page 4k
[ 0.000000] BRK [0x01b88000, 0x01b88fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x0e59a000-0x0f730fff]
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20131115/tbxfroot-211)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0ff00000
[ 0.000000] low ram: 0 - 0ff00000
[ 0.000000] BRK [0x01b89000, 0x01b89fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x0fefffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0fefffff]
[ 0.000000] On node 0 totalpages: 65182
[ 0.000000] free_area_init_node: node 0, pgdat c1990a80, node_mem_map cfd00020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 478 pages used for memmap
[ 0.000000] Normal zone: 61184 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ec000-0x000fffff]
[ 0.000000] e820: [mem 0x10000000-0xfffdffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @cfcee000 s36096 r0 d21248 u57344
[ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64672
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=38893a4a-63bf-4e00-9947-41a73fbd5a3c ro libata.dma=0 verbose console=ttyS1,38400n8 reboot=bios
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 522232 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 227984K/260728K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 32744K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xd0700000 - 0xffbfe000 ( 756 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcff00000 ( 255 MB)
[ 0.000000] .init : 0xc19ae000 - 0xc1a88000 ( 872 kB)
[ 0.000000] .data : 0xc165b0b2 - 0xc19ad4c0 (3401 kB)
[ 0.000000] .text : 0xc1000000 - 0xc165b0b2 (6508 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cf808000 soft=cf80a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS1] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1302.962 MHz processor
[ 0.012011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2605.92 BogoMIPS (lpj=5211848)
[ 0.020008] pid_max: default: 32768 minimum: 301
[ 0.024106] Security Framework initialized
[ 0.028100] AppArmor: AppArmor initialized
[ 0.032008] Yama: becoming mindful.
[ 0.036194] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040012] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.044790] Initializing cgroup subsys memory
[ 0.048047] Initializing cgroup subsys devices
[ 0.052009] Initializing cgroup subsys freezer
[ 0.056008] Initializing cgroup subsys blkio
[ 0.060009] Initializing cgroup subsys perf_event
[ 0.064011] Initializing cgroup subsys hugetlb
[ 0.068121] mce: CPU supports 5 MCE banks
[ 0.072065] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.072065] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[ 0.072065] tlb_flushall_shift: 6
[ 0.094495] Freeing SMP alternatives memory: 32K (c1a88000 - c1a90000)
[ 0.101037] ftrace: allocating 27695 entries in 55 pages
[ 0.124587] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.128029] smpboot: SMP motherboard not detected
[ 0.132008] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.136005] smpboot: SMP disabled
[ 0.148823] Performance Events:
[ 0.152013] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.156005] no hardware sampling interrupt available.
[ 0.160007] p6 PMU driver.
[ 0.164012] ... version: 0
[ 0.168005] ... bit width: 32
[ 0.172004] ... generic registers: 2
[ 0.176005] ... value mask: 00000000ffffffff
[ 0.180005] ... max period: 000000007fffffff
[ 0.184004] ... fixed-purpose events: 0
[ 0.188005] ... event mask: 0000000000000003
[ 0.201963] x86: Booted up 1 node, 1 CPUs
[ 0.204020] smpboot: Total of 1 processors activated (2605.92 BogoMIPS)
[ 0.208032] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
[ 0.212596] devtmpfs: initialized
[ 0.216527] EVM: security.selinux
[ 0.220009] EVM: security.SMACK64
[ 0.224005] EVM: security.ima
[ 0.228005] EVM: security.capability
[ 0.239184] pinctrl core: initialized pinctrl subsystem
[ 0.240365] regulator-dummy: no parameters
[ 0.244113] RTC time: 16:48:35, date: 09/21/14
[ 0.248180] NET: Registered protocol family 16
[ 0.252509] EISA bus registered
[ 0.256020] cpuidle: using governor ladder
[ 0.260006] cpuidle: using governor menu
[ 0.286187] PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=2
[ 0.288007] PCI: Using configuration type 1 for base access
[ 0.297274] bio: create slab at 0
[ 0.300537] ACPI: Interpreter disabled.
[ 0.304290] vgaarb: loaded
[ 0.308636] SCSI subsystem initialized
[ 0.312206] libata version 3.00 loaded.
[ 0.312427] usbcore: registered new interface driver usbfs
[ 0.316056] usbcore: registered new interface driver hub
[ 0.320097] usbcore: registered new device driver usb
[ 0.324410] PCI: Probing PCI hardware
[ 0.328027] PCI: root bus 00: using default resources
[ 0.328033] PCI: Probing PCI hardware (bus 00)
[ 0.328124] PCI host bridge to bus 0000:00
[ 0.332016] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.336008] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.340007] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.344036] pci 0000:00:00.0: [8086:1130] type 00 class 0x060000
[ 0.344221] pci 0000:00:02.0: [8086:1132] type 00 class 0x030000
[ 0.344246] pci 0000:00:02.0: reg 0x10: [mem 0xe8000000-0xebffffff pref]
[ 0.344259] pci 0000:00:02.0: reg 0x14: [mem 0xeff80000-0xefffffff]
[ 0.344370] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.348074] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[ 0.348203] pci 0000:00:1f.0: [8086:2440] type 00 class 0x060100
[ 0.348294] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.352016] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by ICH4 GPIO
[ 0.356086] pci 0000:00:1f.1: [8086:244b] type 00 class 0x010180
[ 0.356145] pci 0000:00:1f.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.356256] pci 0000:00:1f.2: [8086:2442] type 00 class 0x0c0300
[ 0.356316] pci 0000:00:1f.2: reg 0x20: [io 0xee80-0xee9f]
[ 0.356419] pci 0000:00:1f.4: [8086:2444] type 00 class 0x0c0300
[ 0.356479] pci 0000:00:1f.4: reg 0x20: [io 0xef00-0xef1f]
[ 0.356667] pci 0000:02:05.0: [8086:1229] type 00 class 0x020000
[ 0.356694] pci 0000:02:05.0: reg 0x10: [mem 0xefdef000-0xefdeffff]
[ 0.356710] pci 0000:02:05.0: reg 0x14: [io 0xdf00-0xdf3f]
[ 0.356725] pci 0000:02:05.0: reg 0x18: [mem 0xefc00000-0xefcfffff]
[ 0.356767] pci 0000:02:05.0: reg 0x30: [mem 0xefb00000-0xefbfffff pref]
[ 0.356803] pci 0000:02:05.0: supports D1 D2
[ 0.356810] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.356919] pci 0000:02:07.0: [8086:1229] type 00 class 0x020000
[ 0.356944] pci 0000:02:07.0: reg 0x10: [mem 0xefdee000-0xefdeefff]
[ 0.356959] pci 0000:02:07.0: reg 0x14: [io 0xde80-0xdebf]
[ 0.356975] pci 0000:02:07.0: reg 0x18: [mem 0xefa00000-0xefafffff]
[ 0.357015] pci 0000:02:07.0: reg 0x30: [mem 0xef900000-0xef9fffff pref]
[ 0.357052] pci 0000:02:07.0: supports D1 D2
[ 0.357057] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.357149] pci 0000:02:08.0: [8086:1229] type 00 class 0x020000
[ 0.357174] pci 0000:02:08.0: reg 0x10: [mem 0xefded000-0xefdedfff]
[ 0.357189] pci 0000:02:08.0: reg 0x14: [io 0xdd80-0xddbf]
[ 0.357204] pci 0000:02:08.0: reg 0x18: [mem 0xef800000-0xef8fffff]
[ 0.357245] pci 0000:02:08.0: reg 0x30: [mem 0xef700000-0xef7fffff pref]
[ 0.357281] pci 0000:02:08.0: supports D1 D2
[ 0.357287] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.357385] pci 0000:02:09.0: [8086:1229] type 00 class 0x020000
[ 0.357410] pci 0000:02:09.0: reg 0x10: [mem 0xefdec000-0xefdecfff]
[ 0.357425] pci 0000:02:09.0: reg 0x14: [io 0xdd00-0xdd3f]
[ 0.357441] pci 0000:02:09.0: reg 0x18: [mem 0xef600000-0xef6fffff]
[ 0.357482] pci 0000:02:09.0: reg 0x30: [mem 0xef500000-0xef5fffff pref]
[ 0.360027] pci 0000:02:09.0: supports D1 D2
[ 0.360034] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.360153] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.364013] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.364022] pci 0000:00:1e.0: bridge window [mem 0xeed00000-0xefdfffff]
[ 0.364032] pci 0000:00:1e.0: bridge window [mem 0xe6a00000-0xe6afffff pref]
[ 0.364039] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.364045] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.364067] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 0.364207] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2440]
[ 0.368036] PCI: pci_cache_line_size set to 32 bytes
[ 0.368100] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.368109] e820: reserve RAM buffer [mem 0x0ff00000-0x0fffffff]
[ 0.368480] NetLabel: Initializing
[ 0.372013] NetLabel: domain hash size = 128
[ 0.376004] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.380047] NetLabel: unlabeled traffic allowed by default
[ 0.384486] Switched to clocksource pit
[ 0.416405] AppArmor: AppArmor Filesystem Enabled
[ 0.418712] pnp: PnP ACPI: disabled
[ 0.425221] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.430278] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7330
[ 0.430375] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x629b, dseg 0xf0000
[ 0.435906] pnp 00:00: [io 0x4000-0x407f]
[ 0.435915] pnp 00:00: [io 0x0540-0x054f]
[ 0.435921] pnp 00:00: [io 0x4080-0x40bf]
[ 0.435928] pnp 00:00: [io 0x04d0-0x04d1]
[ 0.435934] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.435939] pnp 00:00: [io 0x0290-0x0297]
[ 0.435945] pnp 00:00: [io 0x002e]
[ 0.435950] pnp 00:00: [io 0x002f]
[ 0.436026] pnp 00:00: Plug and Play BIOS device, IDs PNP0a03 (active)
[ 0.436049] pnp 00:01: [mem 0x00000000-0x0009fbff]
[ 0.436056] pnp 00:01: [mem 0x0009fc00-0x0009ffff]
[ 0.436062] pnp 00:01: [mem 0x000f0000-0x000fffff]
[ 0.436067] pnp 00:01: [mem 0x00100000-0x0fefffff]
[ 0.436073] pnp 00:01: [mem 0x0ff00000-0x0fffffff]
[ 0.436079] pnp 00:01: [mem 0xfffffffffffe0000-0xffffffffffffffff]
[ 0.436202] system 00:01: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.441094] system 00:01: [mem 0x0009fc00-0x0009ffff] could not be reserved
[ 0.445972] system 00:01: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.446842] system 00:01: [mem 0x00100000-0x0fefffff] could not be reserved
[ 0.451716] system 00:01: [mem 0x0ff00000-0x0fffffff] has been reserved
[ 0.455550] system 00:01: [mem 0xfffffffffffe0000-0xffffffffffffffff] could not be reserved
[ 0.460587] system 00:01: Plug and Play BIOS device, IDs PNP0c01 (active)
[ 0.460607] pnp 00:02: [io 0x0020-0x0021]
[ 0.460613] pnp 00:02: [io 0x00a0-0x00a1]
[ 0.460621] pnp 00:02: [irq 2]
[ 0.460681] pnp 00:02: Plug and Play BIOS device, IDs PNP0000 (active)
[ 0.460698] pnp 00:03: [dma 4]
[ 0.460705] pnp 00:03: [io 0x0000-0x000f]
[ 0.460711] pnp 00:03: [io 0x0080-0x0090]
[ 0.460716] pnp 00:03: [io 0x0094-0x009f]
[ 0.460722] pnp 00:03: [io 0x00c0-0x00de]
[ 0.460761] pnp 00:03: Plug and Play BIOS device, IDs PNP0200 (active)
[ 0.460785] pnp 00:04: [irq 0]
[ 0.460791] pnp 00:04: [io 0x0040-0x0043]
[ 0.460830] pnp 00:04: Plug and Play BIOS device, IDs PNP0100 (active)
[ 0.460847] pnp 00:05: [irq 8]
[ 0.460854] pnp 00:05: [io 0x0070-0x0071]
[ 0.460900] pnp 00:05: Plug and Play BIOS device, IDs PNP0b00 (active)
[ 0.460917] pnp 00:06: [irq 1]
[ 0.460923] pnp 00:06: [io 0x0060]
[ 0.460929] pnp 00:06: [io 0x0064]
[ 0.460966] pnp 00:06: Plug and Play BIOS device, IDs PNP0303 (active)
[ 0.460990] pnp 00:07: [io 0x0061]
[ 0.461029] pnp 00:07: Plug and Play BIOS device, IDs PNP0800 (active)
[ 0.461045] pnp 00:08: [irq 13]
[ 0.461052] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.461090] pnp 00:08: Plug and Play BIOS device, IDs PNP0c04 (active)
[ 0.461155] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.461162] pnp 00:09: [irq 4]
[ 0.461237] pnp 00:09: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.461292] pnp 00:0a: [io 0x02f8-0x02ff]
[ 0.461298] pnp 00:0a: [irq 3]
[ 0.461363] pnp 00:0a: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.461383] pnp 00:0b: [mem 0xffffffffffb80000-0xffffffffffbfffff]
[ 0.461433] pnp 00:0b: Plug and Play BIOS device, IDs INT0800 (active)
[ 0.461448] PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
[ 0.470950] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.477913] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.480196] pci 0000:00:1e.0: bridge window [mem 0xeed00000-0xefdfffff]
[ 0.484545] pci 0000:00:1e.0: bridge window [mem 0xe6a00000-0xe6afffff pref]
[ 0.490204] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.490211] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.490218] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.490224] pci_bus 0000:02: resource 1 [mem 0xeed00000-0xefdfffff]
[ 0.490231] pci_bus 0000:02: resource 2 [mem 0xe6a00000-0xe6afffff pref]
[ 0.490236] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.490242] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.490402] NET: Registered protocol family 2
[ 0.496167] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.501167] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.504690] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.507841] TCP: reno registered
[ 0.513554] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.515054] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.522106] NET: Registered protocol family 1
[ 0.523256] pci 0000:00:02.0: Boot video device
[ 0.523298] PCI: setting IRQ 5 as level-triggered
[ 0.523308] pci 0000:00:1f.2: found PCI INT D -> IRQ 5
[ 0.526860] pci 0000:00:1f.2: sharing IRQ 5 with 0000:02:09.0
[ 0.532124] PCI: setting IRQ 10 as level-triggered
[ 0.532132] pci 0000:00:1f.4: found PCI INT C -> IRQ 10
[ 0.535880] pci 0000:02:05.0: Firmware left e100 interrupts enabled; disabling
[ 0.541544] pci 0000:02:07.0: Firmware left e100 interrupts enabled; disabling
[ 0.543189] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.548842] pci 0000:02:09.0: Firmware left e100 interrupts enabled; disabling
[ 0.550485] PCI: CLS 32 bytes, default 32
[ 0.550709] Trying to unpack rootfs image as initramfs...
[ 1.705098] Freeing initrd memory: 18012K (ce59a000 - cf731000)
[ 1.707564] microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x0
[ 1.712879] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.715243] Scanning for low memory corruption every 60 seconds
[ 1.722024] Initialise system trusted keyring
[ 1.723308] audit: initializing netlink socket (disabled)
[ 1.727539] type=2000 audit(1411318113.724:1): initialized
[ 1.788635] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.795514] VFS: Disk quotas dquot_6.5.2
[ 1.799501] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.804644] fuse init (API version 7.22)
[ 1.808755] msgmni has been set to 480
[ 1.812272] Key type big_key registered
[ 1.816903] Key type asymmetric registered
[ 1.821260] Asymmetric key parser 'x509' registered
[ 1.825207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.830466] io scheduler noop registered
[ 1.838249] io scheduler deadline registered (default)
[ 1.841765] io scheduler cfq registered
[ 1.845649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.850421] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.858419] intel_idle: does not run on family 6 model 11
[ 1.858439] ipmi message handler version 39.2
[ 1.864015] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.867167] isapnp: Scanning for PnP cards...
[ 1.882318] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.932385] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.985418] Linux agpgart interface v0.103
[ 1.989913] agpgart-intel 0000:00:00.0: Intel i815 Chipset
[ 1.994518] agpgart-intel 0000:00:00.0: detected gtt size: 65536K total, 65536K mappable
[ 1.999418] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 2.007755] brd: module loaded
[ 2.015328] loop: module loaded
[ 2.021290] ata_piix 0000:00:1f.1: version 2.13
[ 2.022372] scsi0 : ata_piix
[ 2.066941] scsi1 : ata_piix
[ 2.071720] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.076599] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.082601] libphy: Fixed MDIO Bus: probed
[ 2.087688] tun: Universal TUN/TAP device driver, 1.6
[ 2.090869] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.097609] PPP generic driver version 2.4.2
[ 2.098589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.106204] ehci-pci: EHCI PCI platform driver
[ 2.110163] ehci-platform: EHCI generic platform driver
[ 2.111306] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.117832] ohci-pci: OHCI PCI platform driver
[ 2.162803] ohci-platform: OHCI generic platform driver
[ 2.166483] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.173618] uhci_hcd 0000:00:1f.2: found PCI INT D -> IRQ 5
[ 2.178364] uhci_hcd 0000:00:1f.2: sharing IRQ 5 with 0000:02:09.0
[ 2.180928] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 2.184609] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 2.186825] uhci_hcd 0000:00:1f.2: irq 5, io base 0x0000ee80
[ 2.192003] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.196362] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.202009] usb usb1: Product: UHCI Host Controller
[ 2.204644] usb usb1: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 2.207697] usb usb1: SerialNumber: 0000:00:1f.2
[ 2.258136] hub 1-0:1.0: USB hub found
[ 2.261444] hub 1-0:1.0: 2 ports detected
[ 2.265770] uhci_hcd 0000:00:1f.4: found PCI INT C -> IRQ 10
[ 2.269479] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 2.270482] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 2.276693] ata1.00: CFA: SanDisk SDCFX3-004G, HDX 4.32, max UDMA/66
[ 2.279746] ata1.00: 8027712 sectors, multi 0: LBA
[ 2.330245] uhci_hcd 0000:00:1f.4: irq 10, io base 0x0000ef00
[ 2.331647] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.335986] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.341633] usb usb2: Product: UHCI Host Controller
[ 2.344268] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 2.347321] usb usb2: SerialNumber: 0000:00:1f.4
[ 2.353445] ata1.00: configured for PIO4
[ 2.357591] hub 2-0:1.0: USB hub found
[ 2.360879] hub 2-0:1.0: 2 ports detected
[ 2.365510] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 2.368893] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.372290] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.375516] mousedev: PS/2 mouse device common for all mice
[ 2.380693] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.470112] isapnp: No Plug & Play device found
[ 2.472287] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFX3-0 HDX PQ: 0 ANSI: 5
[ 2.476595] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram
[ 2.479612] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.483801] device-mapper: uevent: version 1.0.3
[ 2.489877] sd 0:0:0:0: [sda] 8027712 512-byte logical blocks: (4.11 GB/3.82 GiB)
[ 2.492453] sd 0:0:0:0: [sda] Write Protect is off
[ 2.494811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.494875] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.502714] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.508881] platform eisa.0: Probing EISA bus 0
[ 2.511344] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.515248] sda: sda1 sda2 < sda5 >
[ 2.522027] platform eisa.0: EISA: Detected 0 cards
[ 2.525187] cpufreq-nforce2: No nForce2 chipset.
[ 2.527049] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.533737] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2.538694] TCP: cubic registered
[ 2.544919] NET: Registered protocol family 10
[ 2.550924] NET: Registered protocol family 17
[ 2.556327] Key type dns_resolver registered
[ 2.561661] Using IPI No-Shortcut mode
[ 2.565136] Loading compiled-in X.509 certificates
[ 2.575952] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
[ 2.580436] registered taskstats version 1
[ 2.592282] Key type trusted registered
[ 2.603322] Key type encrypted registered
[ 2.614613] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.619097] IMA: No TPM chip found, activating TPM-bypass!
[ 2.623924] regulator-dummy: incomplete constraints, leaving on
[ 2.629867] Magic number: 14:82:844
[ 2.633128] rtc_cmos 00:05: setting system clock to 2014-09-21 16:48:39 UTC (1411318119)
[ 2.637581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.639608] EDD information not available.
[ 2.643996] PM: Hibernation image not present or could not be loaded.
[ 2.648600] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[ 2.652004] Write protecting the kernel text: 6512k
[ 2.654897] Write protecting the kernel read-only data: 2756k
[ 2.707019] Switched to clocksource tsc
[ 2.731517] systemd-udevd[93]: starting version 204
[ 2.919554] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.937878] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.036438] PCI: setting IRQ 6 as level-triggered
[ 3.036465] e100 0000:02:05.0: found PCI INT A -> IRQ 6
[ 3.133895] e100 0000:02:05.0 eth0: addr 0xefdef000, irq 6, MAC addr 00:90:0b:04:8a:c1
[ 3.273863] e100 0000:02:07.0: found PCI INT A -> IRQ 10
[ 3.399818] e100 0000:02:07.0 eth1: addr 0xefdee000, irq 10, MAC addr 00:90:0b:04:8a:c2
[ 3.589416] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3.671575] XFS (sda1): Mounting Filesystem
[ 3.858350] PCI: setting IRQ 11 as level-triggered
[ 3.858380] e100 0000:02:08.0: found PCI INT A -> IRQ 11
[ 3.883847] e100 0000:02:08.0: sharing IRQ 11 with 0000:00:02.0
[ 3.975273] random: nonblocking pool is initialized
[ 4.282062] e100 0000:02:08.0 eth2: addr 0xefded000, irq 11, MAC addr 00:90:0b:04:8a:c3
[ 4.432762] e100 0000:02:09.0: found PCI INT A -> IRQ 5
[ 4.448532] e100 0000:02:09.0: sharing IRQ 5 with 0000:00:1f.2
[ 4.593610] e100 0000:02:09.0 eth3: addr 0xefdec000, irq 5, MAC addr 00:90:0b:04:8a:c4
[ 4.619844] XFS (sda1): Ending clean mount
[ 5.669010] init: plymouth-upstart-bridge main process (146) terminated with status 1
[ 5.710910] init: plymouth-upstart-bridge main process ended, respawning
[ 6.033570] init: plymouth-upstart-bridge main process (156) terminated with status 1
[ 6.060199] init: plymouth-upstart-bridge main process ended, respawning
[ 7.965201] init: plymouth-upstart-bridge main process (160) terminated with status 1
[ 7.988803] init: plymouth-upstart-bridge main process ended, respawning
[ 9.080047] Adding 316412k swap on /dev/sda5. Priority:-1 extents:1 across:316412k FS
[ 9.200347] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.200371] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 9.200382] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 9.200394] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 9.648194] systemd-udevd[269]: starting version 204
[ 10.272007] intel_rng: FWH not detected
[ 10.296183] lp: driver loaded but no devices found
[ 10.546693] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.640282] ACPI Exception: AE_BAD_PARAMETER, Thread 3476858576 could not acquire Mutex [0x1] (20131115/utmutex-285)
[ 10.640310] ACPI Exception: AE_BAD_PARAMETER, Thread 3476858576 could not acquire Mutex [0x1] (20131115/utmutex-285)
[ 10.640317] ACPI Exception: AE_BAD_PARAMETER, Thread 3476858576 could not acquire Mutex [0x1] (20131115/utmutex-285)
[ 11.883338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.069217] init: failsafe main process (450) killed by TERM signal
[ 14.450098] init: udev-fallback-graphics main process (526) terminated with status 1
[ 16.742490] init: plymouth-upstart-bridge main process ended, respawning
[ 226.198191] e100 0000:02:05.0 eth0: NIC Link is Up 100 Mbps Full Duplex
[ 226.198327] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
lspci:
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82815 Chipset Graphics Controller (CGC) (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 05)
00:1f.2 USB controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 05)
00:1f.4 USB controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 05)
02:05.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)
02:07.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)
02:08.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)
02:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)